Oz Roller Shutters is an authorized OzRoll Distributor for genuine OzRoll E-Port Controllers & remote control units.
The charger is used to convert mains 240V AC voltage into a lower DC voltage, that can then be used to charge the battery in the controllers. There are some signs that the old transformer style chargers are now, after 15 years, starting to fail, and this may cause problems with the controllers.The old chargers are a linear, transformer type and are now approaching 15 years in service.
Old Chargers
- 15.240.001 Smart Charge
- 15.245.001 ODS Charger
- 15.248.001 In Wall Charger
- Capacitors used in these old style chargers are now starting to age and fail. This means that the charger may be putting out higher DC voltages, as well as some AC voltage, which may impact on the controller and blow the fuse in the controller. This is not a major issue, but it can be attributed to some of the failures with controllers (old and new), and it will only increase over time.The old style chargers can still work with the new controllers, but customers are encouraged to move to the new style (switch mode) chargers that are now being sold.
The new chargers have a smaller, more modern design and are much more energy efficient.They are backward compatible and a direct replacement for any of the previous OZRoll AC Adaptors
- We recommend that the newer, switch mode style charger be used when upgrading controllers. If you have chargers with model numbers listed above then an upgrade is recommended. The slimline design of the new charger allows much better side by side use in a power-point and uses less energy than the older version. These are all factors to encourage you to convert to using them.
THE PRODUCTS WILL BE SHIPPED AFTER FULL PAYMENT HAS BEEN MADE.
