Verandah Blind
Our Verandah Blind has been proven in thousands of installations in Australia and overseas over eight years and is protected by Patents and Registered Designs. It enables customers to create viable outdoor spaces in home and cafe situations at a fraction of the cost of alternatives. Components are Australian sourced and designed to last for years in our conditions. Few plastic parts and no wear marks means they keep looking good with minimal maintenance. Heavy Duty top tubes and bottom bars are supplied as standard for peace of mind and reduced fabric sag. With manual blinds the locks can be offset, and can be supplied double-sided. Intermediate locking positions can be easily provided to prevent the blinds creeping up.


color option


Maximum Width 3600mm
Maximum Area2 21
Standard Track Dimensions 50mm x 32mm
Bottom Bar Size (Heavy Duty) 62mm
Standard Axle (Heavy Duty) 84mm circular


  • The fabric is held in tracks on both sides. This prevents excessive fabric movement and noisy flapping, and provides a seal on both sides. As the fabric does not need to be tightly stretched, the longevity of the product is improved.
  • The centrally-located locking mechanism makes Rollashield Verandah Blinds easy to use. Customers can raise, lower and lock blinds into position one-handed and without needing to move around the blind.
  • Intermediate locking positions can be easily provided, so that blinds may be set at an ideal shading height. Customers with multiple blinds can select an intermediate position which allows their blinds to line up neatly. The installer simply drills new locking holes on site to the customer’s requirement.
  • The bottom bar is made from aluminium and internal components are stainless steel. Since the top tube is also aluminium, Rollashield Verandah Blinds are ideal for coastal environments when used with stainless steel brackets.
  • A vee-seal or round seal at the base of the bottom bar is provided as standard to prevent marking customers’ floor surfaces; this can be removed, or replaced with a valance on site if required. Vee-seals and skirts can be slid in and out without the need to weld or stitch.
  • The blinds are designed to be unobtrusive and present clean, functional lines. The edge spline is largely concealed, avoiding introduction of another colour.
  • The bottom bar is held within full length channels on both sides, resulting in a very strong design.  Any wear marks which occur over time are hidden.
  • Adjustment for out-of-square is provided by adjusting the tracks on the mounting channels during installation. An optional deep channel is available to assist in awkward mounting applications, such as post saddles or walls with exposed copper pipes, or excessive out-of-square.
  • Locks can be offset to one side and separate locks can be fitted to both sides of the blind if required.
  • Rollashield Verandah Blinds can be face fixed when fitted to a balcony or garden where outside access is not available.
  • Decorative rings or post feet can be accommodated in most situations as only a 35mm slot is required for the sidetrack because the lock is internal.
× Get a Quick Response