$15 Flat Rate Shipping$15 Flat Rate Shipping

OzRoll BAL40 Slat

1mm Thick Extruded Aluminium Fire Rated/CSIRO Tested

Pickup or shipping within Melbourne only!
SKU: AE401 Categories: ,

$5.20 /Meter incl. GST

Clear
Oz Roller Shutters is an authorized OzRoll Distributor for genuine OzRoll E-Port Controllers, remote control units and accessories.     Ozroll’s Sentry Fireshield is ideal for residential or commercial use, particularly in areas prone to fire hazards, making it the ideal option for BAL 40 rated Fire Shutters. Manufactured to the highest standards with state of the art equipment, the Sentry Fireshield profile is available in a 40mm curved profile. The Sentry Fireshield has superior strength offering increased security and performance. The overall profile appearance is clean and stylish with only a slight “V” groove line on the convex side. Available in several long lasting and fade resistant Interpon coatings or a natural anodized finish, the Sentry Fireshield Profile can also be powder coated in a colour of your choice. It is common knowledge that hot or burning embers entering the home during a bushfire is a major factor in the ignition of the building itself. Ozroll’s Sentry Fireshield Roller Shutters have been credited with saving homes from burning to the ground when other surrounding properties were not so fortunate. The Sentry Fireshield BAL 40 Fire Shutters have been extensively tested by the CSIRO under severe bushfire simulated conditions and proved to be able to withstand a maximum radiant heat exposure of 40kw/m2 after 60 minutes. As no ignition or flaming was observed throughout the testing the Sentry Shutter has received a Bushfire Attack Level (BAL) of 40.    
Testing Results
  • Formation of through gaps greater than 3mm
  • Sustained flaming for 10 seconds on the non-fire side
  • Radiant heat flux 365mm from the non-fire side exceeding 15kW/m2
  • Radiant heat flux 250mm from the specimen, greater than 3kW/m2 between 20 minutes and 60 minutes
  • Flaming on the fire-exposed side at the end of the 60 minutes test period
  • Mean and maximum temperature of internal faces exceeding 250˚C and 30
  Features and Benefits
  • Bush-fire Attack Level (BAL) 40
  • Premium strength and security
  • Minimal flex
  • Wide span available
  • Optional powder coating
  • Ideal for commercial applications
  • Light control – 100% light block out*
  *Statistics collected through formal testing in laboratory situations. Results may vary depending on installation & application type.   Technical Specifications  
  • Weight (per m2) - 8 kg
  • Maximum Window Width (with standard guide) -  3.9 m
  • Maximum Window Width (with extended guide) - 4.5 m
  • Maximum Area (m2) - 12
  • Gauge of Aluminium - 1 mm
  • Profile Slat Height - 40 mm
  • Profile Slat Thickness - 9 mm
  Colour Options White, Cream, Sand, Black, Woodland Grey, Deep Ocean Blue and Natural Anodized     NOTE: This Product is sold on the basis of  linear meter. The price displayed is for 1 meter only. CUTTING CHARGE OF $1 PER CUT APPLIES.   THE PRODUCTS WILL BE SHIPPED AFTER FULL PAYMENT HAS BEEN MADE.  

The following are exclusions from warranty, subject always to the Consumer Law:


  1. Oz Roller Shutters only obligation shall be to repair or replace, with the least possible delay, defective equipment which does not conform to the warranty without any other indemnity relating to installation and re-installation or consequential damages.
  2. Oz Roller Shutters shall not be liable for any injury, loss or damage, direct or consequential, arising out of the use of, or the inability to use, the equipment. Before using, the Buyer and/or the end User shall determine the suitability of the product for its intended use, and User assumes all risks and liability in connection therewith.
  3. The articles that are replaced pursuant to the terms of this warranty shall be retained by Oz Roller Shutters.
  4. All costs related to installation and re-installation of the Oz Roller Shutters equipment covered by this warranty are not the responsibility of Oz Roller Shutters.
  5. The user is responsible for any freight costs relating to repair or replacement.
  6. Oz Roller Shutters will not be responsible for any consequential damages during or following installation procedures.
  7. If the buyer resells any Oz Roller Shutters products to another buyer or end-user, it shall include all of the terms and provisions of this warranty in such resale. Oz Roller Shutters responsibility to any such third party shall be no greater than Oz Roller Shutters responsibility under the warranty to the original Buyer.
  8. If written specifications are not properly applied by the Buyer with regards to size and weight limitations.
  9. If Oz Roller Shutters material has been used to perform functions other than the function it was designed to handle, namely enclosing domestic window openings
  10. If Oz Roller Shutters material is used with componentry and/or accessories that have not been previously approved in writing by Oz Roller Shutters.
  11. If Oz Roller Shutters is requested by the Buyer to use any customized colors or to over coat materials then this will void warranty on Roller Shutter Coatings
  12. If Oz Roller Shutters is requested by the Buyer to insert other profiles into a shutter (i.e. AE 401 into AR 401) then this will void the shutter due to the incompatibility of profiles
  13. If the defect is a result of alteration, accident, misuse abuse or neglect.
  14. Deterioration due to normal fair wear and tear.
  15. Damage from weather and/or the environment including hail, wind, rain, lightening, flood, salt and similar.
  16. Please Note: All Somfy® motors and mechanical accessories supplied by Oz Roller Shutters carry the Somfy® Five (5) Year Limited Warranty. All Somfy® controllers and electrical accessories supplied by Oz Roller Shutters carry the Somfy® Two (2) year Warranty.