Name: ODS L10 Motor with Box and Screws
SKU: 15.121.000/15.003.000
Availability: InStock

Only Trust the Original – Genuine OZROLL Parts, only at Oz Roller Shutters

We are an authorised OZROLL distributor, supplying only 100% genuine and certified components, including E-Port controllers, DC motors, remote control units, chargers and all official accessories.

The OzRoll L10 Has A Maximum Lifting Capacity of 16kg
3 YEARS WARRANTY

These motors are battery-operated. Roller shutters, blinds and awnings can still be operated during a power outage.

The ODS L10 motor is a 12V lateral motor that has been specifically designed to work in conjunction with OzRoll’s low-voltage DC controllers.

This motor can fit in end plates 165mm and above, making it available for use in shutters when the width is too small for a tubular motor, such as bathroom windows or bay windows. An internal gear serves as a down stop for the motor, which is set during assembly at our factory. Resistance causes the motor to stop on the way up, which is achieved by using stops in the shutter guide. This means that no limit settings are required during installation.

Technical Specifications ;

Nominal Torque: 10 NM
No Load Speed: 16 rpm
Max Operating Current: 3.6 Amps
Nominal Voltage: 12 volts
Internal End Stop Limits: 18 revolutions each direction.
Download the installation Instructions Here

THE PRODUCTS WILL BE SHIPPED AFTER FULL PAYMENT HAS BEEN MADE.

Oz Roller Shutters only obligation shall be to repair or replace, with the least possible delay, defective equipment which does not conform to the warranty without any other indemnity relating to installation and re-installation or consequential damages.
Oz Roller Shutters shall not be liable for any injury, loss or damage, direct or consequential, arising out of the use of, or the inability to use, the equipment. Before using, the Buyer and/or the end User shall determine the suitability of the product for its intended use, and User assumes all risks and liability in connection therewith.
The articles that are replaced pursuant to the terms of this warranty shall be retained by Oz Roller Shutters.
All costs related to installation and re-installation of the Oz Roller Shutters equipment covered by this warranty are not the responsibility of Oz Roller Shutters.
The user is responsible for any freight costs relating to repair or replacement.
Oz Roller Shutters will not be responsible for any consequential damages during or following installation procedures.
If the buyer resells any Oz Roller Shutters products to another buyer or end-user, it shall include all of the terms and provisions of this warranty in such resale. Oz Roller Shutters responsibility to any such third party shall be no greater than Oz Roller Shutters responsibility under the warranty to the original Buyer.
If written specifications are not properly applied by the Buyer with regards to size and weight limitations.
If Oz Roller Shutters material is used with componentry and/or accessories that have not been previously approved in writing by Oz Roller Shutters.
If Oz Roller Shutters is requested by the Buyer to use any customized colors or to over coat materials then this will void warranty on Roller Shutter Coatings
If Oz Roller Shutters is requested by the Buyer to insert other profiles into a shutter (i.e. AE 401 into AR 401) then this will void the shutter due to the incompatibility of profiles
If the defect is a result of alteration, accident, misuse abuse or neglect.
Deterioration due to normal fair wear and tear.
Damage from weather and/or the environment including hail, wind, rain, lightening, flood, salt and similar.li>
Please Note: All Somfy® motors and mechanical accessories supplied by Oz Roller Shutters carry the Somfy® Five (5) Year Limited Warranty. All Somfy® controllers and electrical accessories supplied by Oz Roller Shutters carry the Somfy® Two (2) year Warranty.

ODS L10 Motor with Box and Screws

Description

Warranty

Related products