$20 Flat Rate Shipping$20 Flat Rate Shipping

72 mm Flanged Guide Rail

Extruded Aluminium Guide/Track

No delivery, only pickup within Melbourne!
SKU: FGR.72.770 Categories: ,

$34.00 /Meter incl. GST

Total width in meters (Width x Pieces)
Oz Roller Shutters is an authorized OzRoll Distributor for genuine OzRoll E-Port Controllers, remote control units and accessories.  
  • Oz Roller Shutters offers a wide range of guide rails, which can be used to implement perfect solutions for any installation situation.
  • The Extruded Guide rails are manufactured from premium-quality aluminium.
  • The window rolling shutter curtain moves up and down vertically inside the guide rail.
  • The Guide rails also support the Head-Box
  • This guide rail is mostly used in-reveal situations or when there is a limited space.
  • The Guide Rails provide reliable curtain movement thanks to brush insert.


This Guide rail is 72 mm x 23 mm. with a flange of 30 mm.  

Advantages of Flange Guide Rail

  • This guide rail with flange has been specifically designed to enhance security. The L- shaped formation of this guide rails wraps around the brick corner. The holes are drilled on flange part of the guide rail and through these holes the brick wall is drilled. Screws are then fixed to the wall. When the shutter is in down position, the screws are behind the roller shutter curtain making them impossible to access for a would-be intruder.
  • Another advantage of Flange Guide rails is that it covers all the mortar gaps on brick edge. No light comes through mortar gaps as it has wrapped around the brick corner unlike 53 mm guide rails where the light penetrates through mortar gaps even if the shutter is in down position.
  • The section where the shutter moves is more deeper than 53 mm track allowing extra curtain width to go inside the guide rail making it harder to pull the rolling shutter out of the guide rails.

The following are exclusions from warranty, subject always to the Consumer Law:

  1. Oz Roller Shutters only obligation shall be to repair or replace, with the least possible delay, defective equipment which does not conform to the warranty without any other indemnity relating to installation and re-installation or consequential damages.
  2. Oz Roller Shutters shall not be liable for any injury, loss or damage, direct or consequential, arising out of the use of, or the inability to use, the equipment. Before using, the Buyer and/or the end User shall determine the suitability of the product for its intended use, and User assumes all risks and liability in connection therewith.
  3. The articles that are replaced pursuant to the terms of this warranty shall be retained by Oz Roller Shutters.
  4. All costs related to installation and re-installation of the Oz Roller Shutters equipment covered by this warranty are not the responsibility of Oz Roller Shutters.
  5. The user is responsible for any freight costs relating to repair or replacement.
  6. Oz Roller Shutters will not be responsible for any consequential damages during or following installation procedures.
  7. If the buyer resells any Oz Roller Shutters products to another buyer or end-user, it shall include all of the terms and provisions of this warranty in such resale. Oz Roller Shutters responsibility to any such third party shall be no greater than Oz Roller Shutters responsibility under the warranty to the original Buyer.
  8. If written specifications are not properly applied by the Buyer with regards to size and weight limitations.
  9. If Oz Roller Shutters material has been used to perform functions other than the function it was designed to handle, namely enclosing domestic window openings
  10. If Oz Roller Shutters material is used with componentry and/or accessories that have not been previously approved in writing by Oz Roller Shutters.
  11. If Oz Roller Shutters is requested by the Buyer to use any customized colors or to over coat materials then this will void warranty on Roller Shutter Coatings
  12. If Oz Roller Shutters is requested by the Buyer to insert other profiles into a shutter (i.e. AE 401 into AR 401) then this will void the shutter due to the incompatibility of profiles
  13. If the defect is a result of alteration, accident, misuse abuse or neglect.
  14. Deterioration due to normal fair wear and tear.
  15. Damage from weather and/or the environment including hail, wind, rain, lightening, flood, salt and similar.
  16. Please Note: All Somfy® motors and mechanical accessories supplied by Oz Roller Shutters carry the Somfy® Five (5) Year Limited Warranty. All Somfy® controllers and electrical accessories supplied by Oz Roller Shutters carry the Somfy® Two (2) year Warranty.
× Get a Quick Response